Missing DLL or driver on Windows

Do you always send the message in the windows pop up that your program can not be run because missing the DLL file (driver file), so you can write about the missing DLL  in thatt windows message pop up. find it in the your browser and download them in your computer .
WE have suggested this website link for find your missing DLL (Nodevice.com), or you can search on your browser about "DLL driver / file"
after that you can do this step to instal on your computer

1. Uncompress the DLL downloaded file from DLL-Downloads.com to your system32 folder within the Windows folder.  [c:\WINDOWS\system32]
2. Click on the Start button, then click the Run... option
3. In the "Open" line, type the following (without quotes) "regsvr32 filename.dll" (replace filename.dll with the actual filename of the file you downloaded), then click the "OK" button.





4. If the installation was successful, you should see a message saying that your file was successfully installed/uninstalled.
   
   

Check Your Hard Disk For Errors

When using your computer regularly you need to keep up with computer maintenance and to check you hard disk drive for errors is one of those tasks. Your hard disk drive is where everything is stored on your computer so to say the hard drives performance is important is an understatement.
You can not only help solve some computer problems but you can also improve the performance of your computer by making sure that your hard disk has no errors.

1.  Open Computer by clicking the Start button , and then clicking Computer.

2.  Right-click the hard disk drive that you want to check, and then click Properties.

3. Click the Tools tab, and then, under Error-checking, click Check Now.  If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

What does Windows error checking do?

To automatically repair problems with files and folders that the scan detects, select Automatically fix file system errors. Otherwise, the disk check will simply report problems but not fix them.
To perform a thorough disk check, select Scan for and attempt recovery of bad sectors. This scan attempts to find and repair physical errors on the hard disk itself, and it can take much longer to complete.
To check for both file errors and physical errors, select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors.
Depending upon the size of your hard disk, this may take several minutes. For best results, don’t use your computer for any other tasks while it’s checking for errors.

Instal windows XP part 4

Step 19 - Finally Windows will start and present you with a Welcome screen. Click next to continue.

Step 20 - Choose 'help protect my PC by turning on automatic updates now' and press next.

Step 21 - Will this computer connect to the internet directly, or through a network? If you are connected to a router or LAN then choose: 'Yes, this computer will connect through a local area network or home network'. If you have dial up modem choose: 'No, this computer will connect directly to the internet'. Then click Next.

Step 22 - Ready to activate Windows? Choose yes if you wish to active Windows over the internet now. Choose no if you want to activate Windows at a later stage.

Step 23 - Add users that will sign on to this computer and click next.

Step 24 - You will get a Thank you screen to confirm setup is complete. Click finish.

Step 25. Log in, to your PC for the first time.

Step 26 - You now need to check the device manager to confirm that all the drivers has been loaded or if there are any conflicts. From the start menu select Start -> Settings -> Control Panel. Click on the System icon and then from the System Properties window select the Hardware tab, then click on Device Manager.

If there are any yellow exclamation mark "!" next to any of the listed device, it means that no drivers or incorrect drivers has been loaded for that device. In our case we have a Video Controller (VGA card) which has no drivers installed.

Your hardware should come with manufacturer supplied drivers. You need to install these drivers using the automatic setup program provided by the manufacturer or you need to manually install these drivers. If you do not have the drivers, check the manufacturers website to download them.

To install a driver manually use the following procedure:

(a) From the device manager double click on the device containing the exclamation mark.

(b) This would open a device properties window.

(c) Click on the Driver tab.

(d) Click Update Driver button. The Wizard for updating device driver pops up as shown below:

You now get two options. The first option provides an automatic search for the required driver. The second option allows you to specify the location of the driver. If you don't know the location of the driver choose the automatic search which would find the required driver from the manufacturer supplied CD or Floppy disk. Windows would install the required driver and may ask you to restart the system for the changes to take affect. Use this procedure to install drivers for all the devices that contain an exclamation mark. Windows is completely setup when there are no more exclamation marks in the device manager.


and when you need some trouble here you can follow this help form 


 <<Before

Instal windows XP part 3

Step 11 - After the setup has completed copying the files the computer will restart. Leave the XP CD in the drive but this time DO NOT press any key when the message "Press any key to boot from CD" is displayed. In few seconds setup will continue. Windows XP Setup wizard will guide you through the setup process of gathering information about your computer.

Step 12 - Choose your region and language.

Step 13 - Type in your name and organization.

Step 14. Enter your product key.

Step 15 - Name the computer, and enter an Administrator password. Don't forget to write down your Administrator password.

Step 16 - Enter the correct date, time and choose your time zone.

Step 17 - For the network setting choose typical and press next.

Step 18 - Choose workgroup or domain name. If you are not a member of a domain then leave the default settings and press next. Windows will restart again and adjust the display.

 <<Before | Next >>

Instal windows XP part 2

Step 7 - You will be presented with the End User Licensing Agreement. Press F8 to accept and continue

Step 8 - This step is very important. Here we will create the partition where Windows will be installed. If you have a brand new unformatted drive you will get a screen similar to below. In our case the drive size is 8190MB. We can choose to install Windows in this drive without creating a partition, hence use the entire size of the drive. If you wish to do this you can just press enter and Windows will automatically partition and format the drive as one large drive.

However for this demonstration I will create two partition. The first partition will be 6000MB (C: drive) and second partition would be 2180MB (E: drive). By creating two partition we can have one which stores Windows and Applications and the other which stores our data. So in the future if anything goes wrong with our Windows install such as virus or spyware we can re-install Windows on C: drive and our data on E: drive will not be touched. Please note you can choose whatever size partition your like. For example if you have 500GB hard drive you can have two partition of 250GB each.

Press C to create a partition.

Step 8 - Windows will show the total size of the hard drive and ask you how much you want to allocate for the partition you are about to create. I will choose 6000MB. You will then get the screen below. Notice it shows C: Partition 1 followed by the size 6000 MB. This indicates the partition has been created. We still have an unpartitioned space of 2189MB. Next highlight the unpartitioned space by pressing down the arrow key. Then press C to create another partition. You will see the total space available for the new partition. Just choose all the space left over, in our case 2180MB.

Step 9 - Now you will see both partition listed. Partition 1 (C: Drive) 6000MB and Partition 2 (E: Drive) 2180MB. You will also have 8MB of unpartitioned space. Don't worry about that. Just leave it how its is. Windows normally has some unpartitioned space. You might wonder what happened to D: drive. Windows has automatically allocated D: drive to CD/DVD-ROM.

Select Partition 1 (C: Drive) and press Enter.

Step 10 - Choose format the partition using NTFS file system.This is the recommended file system. If the hard drive has been formatted before then you can choose quick NTFS format. We chose NTFS because it offers many security features, supports larger drive size, and bigger size files.

Windows will now start formatting drive C: and start copying setup files as shown on the two images below :

 <<Before | Next>>

Computer running too slow ..

why your computer runnng too slow...

Symptoms	Probable Causes	Solution	Find
Lack of disk space	System is bloated	Cleans up your PC from over	click on start/accesories/
General system			system tools /disc cleanup
Slow down			or you can search in
	with junk files.	70 different types of junk files.	your browser disc clean up
Slow program start-ups	Files and free space	Defragments and	Click on start/accessories/
		re-arranges files to	system tool/disc defragment
		ensure the most	or you can search in
Poor responsiveness	are fragmented.	efficient file placement.	browser disc defragment
System errors	Windows registry	Cleans up obsolete	You can find in your browser
Random program failures	contains obsolete	records, fixes corrupt	"registry fix program download"
	or corrupt records.	references and	copy and installed, run it.
		defragments the registry.
Windows takes too long to load	Various programs set	Allows you to	Click on start/start up menus
	themselves to start	disable programs	you can able
	on boot automatically.	from starting up	or
		when your PC boots.	disable the program
Slow Internet browsing	Windows uses preset	Optimizes Windows	Click on start/ control panel/
and download speed	settings that are not	settings specifically	internet connection /
	optimized for	for the type of Internet	then delete cookies
	your connection type.	connection you use.	or clean history